LivePure LP260TH, Owner'S Manual

Page: 7 / 14

Operation
Control Panel Operation
Using the Controls:
1. Power:
Press the
On/Off
button
to turn air purifier ON or OFF.
2. Accent Light: Press the Accent
Light
button to turn the accent
light ON or OFF.
3. Speed/Sleep:
Press the
Speed/Sleep button to select
Low, Medium, High or Sleep
Mode. Low provides the best
product sound. Medium offers
moderate cleaning. High provides
strong cleaning power. Sleep
Mode operates on Low until
mode is manually changed.
4. Timer:
Press the
Timer
button to select from 2, 4, or 8 hour timer
settings.
5. Filter Indicator: Press the Filter Indicator button to reset once the
pre-filter and/or filter have been cleaned or replaced, depending on the
model purchased. See instructions on resetting the light below.
Resetting Filter Indicator:
Pre-Filter Indicator Light:
After approximately 3 months of use (aver-
age of 12 hours daily use), the pre-filter indicator light will turn red and
flicker. After pre-filter is cleaned or replaced, depending on the model
you purchased, press and hold the Filter Indicator button for 3 seconds.
The unit will beep 3 times to indicate reset.
HEPA Filter Indicator Light:
After approximately 6 months of use
(average of 12 hours daily use), the HEPA filter indicator light will turn red
and flicker. After filter is cleaned or replaced, depending on the model
you purchased, press and hold the
Filter Indicator
button for 3 seconds.
The unit will beep 3 times to indicate reset.
The air purifier is operated by the digital controls located on the air
purifier top. This manual covers several different models. The air purifier
you have purchased may have some or all of the features listed.