Controls
1. Power button: press this button to turn the unit on or off.
2. Air compression button: press this button to cycle through
the air compression intensity settings (low, medium, high).
3. Mode 1: press this button to set the massager to mode 1.
4. Mode 2: press this button to set the massager to mode 2.
Modes
Mode 1: Full foot massager
The leg massager will go through 4 unique cycles as described below.
Cycle 1:
1. The feet and calves will both inflate.
2. The air pressure will hold.
3. The foot and calf will both inflate again
4. The air pressure will hold.
5. The massagers will deflate.
NOTE: Cycle 1 will repeat for a total of 4 times.
Cycle 2:
1. The feet will inflate.
2. The air pressure will hold.
3. The feet will deflate.
4. The calves will inflate
5. The air pressure will hold.
6. The calves will deflate.
NOTE: Cycle 2 will repeat for a total of 3 cycles.
Cycle 3:
1. The feet and calves will both inflate.
2. The air pressure will hold.
3. The massagers will deflate.
NOTE: Cycle 3 will repeat for a total of 4 cycles.
Cycle 4:
1. The feet will inflate.
2. The air pressure will hold.
3. The feet will deflate.
4. The calves will inflate
5. The air pressure will hold.
6. The calves will deflate.
NOTE: Cycle 4 will repeat for a total of 3 cycles.
3
1
2
3
4
