LIVARNO home 359619 2101, Operation And Safety Notes

Page: 11 / 42

11 GB/IE
To maintain splash protection of the product, this
product must not be used without all gaskets
and slide being properly installed.
Before use
Note: Remove all packaging materials from the
product.
Setting up the product
Connect the spike
13
:
Put the LED projector onto the spike
13
and
connect it by turning it counterclockwise (fig. D).
Insert the spike
13
deep into the ground, lawn
or flower bed (indoor or outdoor) for it to be
stable (fig. D).
Note: For better projection performance, sug-
gest to place the product at least 1 meter away
from the projection surface (wall, ceiling, etc.).
Connect the round base
2
:
Put the LED projector onto the round base
2
and connect it by turning it counterclockwise
(fig. A). Then put the product on a flat surface.
Insert the connection plug
5
of the LED pro-
jector into the socket of the mains adapter
7
(fig. B).
Note: Lay the cable so that tripping is avoided.
Turn the union nut
4
in clockwise direction to
fix the connection (fig. B).
Insert the mains adapter
7
into the mains
socket. The product is ready to use.
Exchange the slide
10
:
Unscrew and remove the two screws
12
on the
LED projector casing.
Remove the slide
10
by pulling the cover
11
out.
While being careful to avoid touching the
slide film.
Put the the desired slide
10
in with right side
and fixed it.
Ensure place the slide seal ring
9
before place
the slide cover
11
.
Ensure the screw seal ring
8
still enclose screw
12
before tighten the two screws
12
(fig. C).
Q
Cleaning and care
CAUTION! DANGER OF ELECTRIC SHOCK!
First pull the mains adapter
7
out of the mains socket.
CAUTION! DANGER OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
Clean the product regularly with a dry, lint-free
cloth. Use a slightly dampened cloth to remove
more stubborn dirt.
Q
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.