15
GB/IE
Safety / Preparation / Installation
Installation / Cleaning / Disposal / Warranty and service
Connect the mains connection cable (external)
11
using the lustre terminals
12
(see Fig. C).
Be sure the colours of the connected lines match
(L or 2 = black or brown, N or 1 = blue or
white).
Protection class 2: This light is specially insulated
and must not be connected to a protective
conductor.
Re-insert the rubber membrane
10
in the con-
nection box
6
.
Close the connection box
6
by attaching the
rubber cover
7
and the cover
8
using the
four screws
9
of the connection box
6
(see
Fig. D).
Attach the light base
5
using the screws
14
provided (see Fig. E).
NOTE:
Ensure that you attach the light base
5
to the wall with both curvatures facing downwards
(see Fig. E). The light may not be installed in
any other way!
Screw the light bulbs
4
into the sockets
3
(see Fig. F).
Now place the housing
2
on the light base
5
and tighten the screws
1
(see Fig. G).
NOTE:
Ensure that you attach the housing
2
to the wall with both curvatures facing down-
wards. The light may not be installed in any
other way!
Reinstall the fuse or switch on the circuit breaker
in the fuse box (I position).Your light is now
ready to use.
Changing the light bulbs
Use a clean and dry lint-free cloth to replace
the light bulb
4
.
To do so, remove the fuse or switch off the
circuit breaker in the fuse box (position 0).
Remove the housing
2
(see Fig. A).
Unscrew the defective light bulb
4
from the
socket
3
, turning a ¼ turn anti-clockwise.
Carefully push the light bulb
4
into the socket
3
and secure with a ¼ turn clockwise.
Attach the housing
2
(see Fig. G) and reinsert
the fuse or switch the circuit breaker back on
(I setting).
Cleaning
RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit before
cleaning. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (position 0).
Allow the light to cool off completely.
Only use a dry, lint-free cloth for cleaning. Do
not use solvents, spirit or similar substances.
They could damage the light.
Reinstall the fuse or switch on the circuit breaker
in the fuse box (I position).Your light is now
ready to use.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Warranty and service
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect during the warranty period,
