16 GB/IE
the use of a different adapter is ex-
cluded from the warranty.
Never touch the mains adapter
7
with moist or wet hands.
Unplug the mains adapter
7
from
the socket if the product will not be
used for an extended period (e.g.
whilst on holiday).
The product becomes hot during
operation. Allow the product to
cool before you touch them.
The product is only suited for
use with the included mains
adapter (Model No.
RSS1002-022110-W2E).
Please note that the mains adapter
7
continues to draw a small
amount of power even if the prod-
uct is turned off as long as the
mains adapter
7
is plugged into a
power outlet. To switch the product
off completely, unplug the mains
adapter
7
from the socket.
The LEDs are not replaceable.
If the LED fail at the end of their lives,
the entire product must be replaced.
Q
Bringing into use
Note:
Remove all packaging materials
from the product.
Never direct the LED light beam on
to reflective surfaces or at people
or animals. Failure to observe this
advice may result in eye injury and /
or loss of sight to people or animals.
Even a weak LED light beam can
cause eye damage.
Place the product down with its
base
2
supported on a flat and
horizontal surface.
Connect the mains connector
4
to
the connector socket
3
.
Insert the mains adapter
7
into an
ordinary domestic mains outlet
socket (100–240 V~ (alternating
current)).
Use the ON / OFF switch
5
to
switch the product on or off.
Bend the flexible lamp arm
1
to
bring the product into the desired
position.
Note:
Do not turn the flexible lamp
arm
1
completely about itself or
the mains connection lead
6
inside
the product could be damaged.
Q
Maintenance
and Cleaning
Note:
The product requires no mainte-
nance. The LEDs cannot be replaced.
