19
GB/IE
Press the ON button
6
on the remote
control to switch the product on (Fig. A).
Note:
Please note the remote control uses
infrared lamp: it does not allow the signal
to be transmitted “around the corner“ as
radio waves do. Light-tight objects may not
be located between the diode
14
and the
lamp
1
.
The lamp
1
will now light up white.
Operation
Select a light colour or different colour change
effects using the remote control
2
(Fig. A):
Selecting the light colour
Press one of the colour buttons
12
or the
W button
7
to select a light colour corre-
sponding with the button.
Press the button
3
to gradually increase
the brightness level.
Press the button
4
to gradually reduce
the brightness level.
There are 5 brightness level.
Color changing mode
FLASH:
Press the FLASH button
8
to
select a colour change pattern alternating
between the basic colours red, green and
blue (RGB).
STROBE:
Press the STROBE button
9
to
select a sophisticated colour changing
program:
- white light flashes 6 times, then ...
- RGB light colours alternate with a “rough“
transition, then ...
- 7-colour change with a “rough“ transition,
then ...
- RGB light colours change with a “soft“
transition, then ...
- 7-colour change with a “soft“ transition.
FADE:
Press the FADE button
10
to gener-
ate a colour change between 7 colours and
a “soft“ transition.
SMOOTH:
Press the SMOOTH button
11
to generate a colour change between
7 colours and a “rough“ transition.
Repeatedly press the button
3
to grad-
ually increase the color changing speed.
Repeatedly press the button
4
to grad-
ually reduce the color changing speed.
There are 5 speeds level.
