LIVARNO LUX 14123002L, Operation And Safety Notes

Page: 8 / 37

8 GB
Disposal / Warranty and Service
Initial Use
Assembling the light
Caution: The lamp glass
2
and the ring nut
1
are pre-assembled, but are not screwed
tight.
Bring the lamp glass
2
into the correct position.
Screw the lamp glass
2
to the ring nut
1
. Be
sure they are positioned correctly.
Use a clean, lint-free, dry cloth to insert the
bulb
5
.
Screw the illuminant
5
clockwise into the
lamp socket
3
(see Fig. B).
Plug the mains plug
4
into a properly in-
stalled socket.
Your light is now ready to use.
Switching the light on / off
Press the ON / OFF in-line switch
7
to switch
the light on and off.
Dimming the bulb
The light is only dimmable using the bulb
5
supplied. To dim the bulb
5
in the light, switch
the light on and off multiple times in short suc-
cession using the ON / OFF in-line switch
7
.
Replacing the bulb
RISK OF ELECTRIC SHOCK!
First unplug the mains plug
4
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES! Allow the lamp to cool down
completely.
Use a clean, lint-free, dry cloth when replacing
the illuminant
5
.
Unscrew the defective illuminant
5
from the
lamp socket
3
, turning counter-clockwise.
Screw a new illuminant, clockwise into the
lamp socket
3
.
Plug the mains plug
4
into a properly in-
stalled socket.
Your light is now ready to use.
Maintenance and Cleaning
RISK OF ELECTRIC SHOCK!
First remove the mains plug
4
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES! Allow the lamp to cool down
completely.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Plug the mains plug
4
into a properly in-
stalled socket.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
Initial use / Replacing the bulb / Maintenance and Cleaning / Disposal