LIVARNO LUX 113907, Operation And Safety Notes

Page: 9 / 45

9 GB
Preparing the ... / Care and cleaning / Disposal / Warranty and Service
Then screw a new bulb clockwise into the fitting.
Note: Use only 230–240 volt ∼ energy-saving
bulbs with an E14 fitting and a maximum power
output of 9 watts for the reading lamp. Use
only 230–240 volt ∼ energy-saving bulbs with
an E27 fitting and a maximum power output of
22 watts for the uplight.
or
Use only 230–240 volt ∼ bulbs with an E14
fitting and a maximum power output of 25 watts
for the reading lamp. Use only 230–240 volt ∼
bulbs with an E27 fitting and a maximum power
output of 60 watts for the uplight.
Plug the mains plug
12
into the socket again.
Care and cleaning
RISK OF ELECTRIC SHOCK!
First pull the mains plug
12
out of the mains socket.
CAUTION! RISK OF BURNS! First allow the
lamp to cool completely.
RISK OF ELECTRIC SHOCK!
For electrical safety reasons, never clean the lamp
with water or other fluids nor immerse it in water.
Do not use any solvents, petrol or similar. This
would cause damage to the light.
Always use a dry, fluff-free cloth for cleaning.
Plug the mains plug
12
into the socket again.
Disposal
The packaging and ancillary packing
consist entirely of environmentally-
friendly materials. They can be disposed
of at your local recycling facility.
The symbol of the wheelie bin with the line
through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Products marked in this way may not be disposed
of along with normal domestic waste but have to
be handed in at a recycling collection point for
electrical and electronic appliances. Recycling helps
to reduce the consumption of raw materials and to
ease the burden on the environment.
Warranty and Service
Warranty Declaration
This product has a 3-year warranty from the date
of purchase; the warranty is only valid for the origi-
nal purchaser and is not transferable. Please keep
your receipt as proof of purchase. The warranty
applies to material or manufacturing defects only. It
does not cover wear parts or damage caused by
improper use. The guarantee lapses in cases of un-
authorized tampering. Your statutory rights are not
restricted in any way by this warranty. Please con-
tact the service centre by telephone. In the event of
any claims under the warranty. This is the only way
to ensure that your instrument can be returned free
of charge.
Service address
Briloner Leuchten GmbH
Im Kissen 2, 59929 Brilon, Germany
Tel.: +49 (0) 29 61 / 97 12–800
Fax: +49 (0) 29 61 / 97 12–1 99
E-Mail: kundenservice@briloner.com
www.briloner.com
IAN 113907
Please have your receipt and the product number
(e.g. IAN 12345) available for all queries as proof
of purchase.