9
GB
z
Assembly and installation
Please note:
Take the product out of its
packaging and remove all packing material�
Check that all package contents are
present�
Check if the product or individual parts are
damaged� Should you detect damage, do
not use the product� Please contact the
retailer via the service address indicated�
Insert the LED module
6
into the open LED
star
1
via the designated fixture as shown
in Fig� D�
Fold the lower side upwards and close the
star� Attach the LED module
6
on the left
and right sides using the gland nut
2
(see
Fig� D)�
Hang the product in a location of your
choosing�
FIRE HAZARD!
Never hang the product above an
open fire or heat source. This may
damage the product and excessive heat
build-up can cause a fire.
RISK OF DAMAGE!
Take sufficient
measures to secure the product from
falling down�
Use the hook
5
provided to hang the
product from a suitable ceiling (see Fig� A)�
Connect power supply
RISK OF ELECTRIC SHOCK!
Plug the connector
8
into the socket
9
of
the mains plug
3
(see Fig� B)�
Tighten the union cap
7
on the screw
thread of the connection socket
9
�
Plug the mains plug
3
into a socket that
has been correctly installed�
Please note:
When using outdoors, plug
the mains plug
3
in to an IPX4 socket to
ensure splash protection�
z
Operation
DANGER OF OVERHEATING!
Do
not operate the product while it is
still inside the packaging!
Please note:
Only use the product with the
supplied mains plug� Do not connect the
product or the mains plug to any external
devices�
Please note:
The product stays lit as long as
it is connected to the power supply� If you
unplug it, the product will automatically
switch off�
Timer function
To activate the timer function, keep the
button
10
on the mains plug
3
pressed
down until the LED light turns green (see
Fig� C)� The timer has now been activated�
When the timer function is switched on, the
product is switched on for 6 hours and then
switched off for 18 hours�
Replacing the LEDs
RISK OF ELECTRIC SHOCK!
Incorrect handling of the product or
incorrect installation may potentially
result in personal injury�
The light source of this product may only be
replaced by the manufacturer, their
designated service technician, or a similarly
qualified person.
Instructions for replacing the LEDs for
qualified professionals are available on our
website: www�citygate24�de
All technical data can be found on our
website: www�citygate24�de
z
Cleaning and storage
RISK OF ELECTRIC SHOCK!
Always unplug the mains power
cable from the socket before
