![background image](http://html1.mh-extra.com/html/little-wonder/5612-12-01/5612-12-01_operators-and-parts-manual_1929704011.webp)
11
LITTLE
WONDER
PRO VAC SP
CONTROLS
THROTTLE (A)
Controls engine speed and vacuum suction level.
CHOKE (B)
Move to the “CHOKE” position to apply the choke.
Move to the “RUN” position to remove the choke.
FUEL SHUT OFF (C)
Move to the “OFF” position to shut off the fuel
whenever transporting the machine by trailer or truck
or during storage. Move to the “ON” position before
starting the engine. The “OFF” position also can
be used to “KILL” the engine as a “KILL” switch is
combined with the fuel shutoff.
ADJUSTING KNOB (D)
Adjusts nozzle height.
RECOIL STARTER HANDLE (E)
Pull to turn over the engine to start it. Guide the
recoil starter handle back to the rope guide for best
rope life. Allowing the rope to snap back will shorten
rope life.
ENGINE SWITCH (F)
Move to the “OFF” position to stop the engine. Move
to the “ON” position before starting engine.
FREE WHEEL ROD (G)
Pull the free-wheel rod until the enlarged boss
comes through the keyhole on the free-wheel
bracket, then slide the rod down the slot to latch it to
free wheel or push the machine without the engine
running. Raise the rod until the enlarged boss pops
back behind the bracket to engage the transmission.
BAIL (H)
Push the bail towards the handle to move the
vacuum forward. Pull the bail back to move in
reverse.