LITTLE TINKERER Mangobot MC1001, Instruction Book

Page: 8 / 10

If Mangobot/Coding Processor cannot power-on:
• Please check whether it has too low battery power. If so,
replace the batteries or recharge it.
If Mangobot cannot pair with Coding Processor:
• Please check if they are placed too far apart.
• Manually pair them by pressing the pairing buttons on both
Mangobot and Processor. See the previous Bluetooth Pairing
instructions.
If Mangobot cannot be controlled by Coding Processor:
• Please make sure that both Mangobot and Processor are
powered on.
• Please make sure the blocks are sequenced correctly, i.e. there
is no bug in your program.
• Please restart Mangobot and Coding Processor and try again.
If your Mangobot does not run normally,
these are things to check:
Mangobot running abnormally?
Please read these instructions before using.
Charging and Battery Care
If Mangobot displays four empty squares , it indicates
low battery power. Please recharge.
The Coding Processor is powered by 2x1.5V AA batter-
ies. Batteries should be installed or replaced by an
adult. Please make sure that the Processor is powered
off when replacing or installing the batteries.
8