Before playing, cover the area to prevent possible water damage.
Before playing, cover the area to prevent possible water damage.
3
2
WATER FILL LINE
PUMP ASSEMBLY
USING THE SINK
Use a screwdriver (not included) to assemble the pump onto the faucet (B) with the three screws (L).
PUMP
Fit faucet/pump assembly into the opening in the sink.
The faucet should face the sink basin.
Hold sink stopper over the sink drain and
press down firmly until it pops into place.
Press down firmly on the faucet/pump unit until
it snaps into place. NOTE: Faucet pump/unit
cannot be removed once assembled.
SCREWS
1
2
3
4
1a
B.
L. x 3
FAUCET
UNIT
PUMP
FAUCET
UNIT
FAUCET
UNIT
After you are finished playing, lift the sink stopper
slightly and hold to drain water from sink basin.
With the stopper fully covering the sink drain, press
down on the pump plunger several times until water
begins to flow out of the faucet and into the sink.
5
Pull outward on the side edges of the sink top
and lift to remove the top from the sink base.
Place the sink top onto the sink base and press firmly.
NOTE: The pump will fit into the pump bracket.
Fill sink base ONLY with clean, clear water up to
the water fill line. DO NOT use other liquids or
soap of any kind with the sink.
PUMP BRACKET
PUMP
1
2
3
3a
4
Press down
several times!