4.
Take readings on the left front and right front corners of the table.
Calculate the difference to see how much and which way to move the top of
the column.
5.
Move the column and take additional readings. Repeat until the readings are
the same to within 0.001”.
6.
Tighten the large nut at the back of the base of the column.
Motor to Intermediate Gear Adjustment
A metal gear on the motor drives a plastic gear on the top of the intermediate
shaft. If these gears are not meshed properly, they can make a lot of noise. It
is easy to adjust the mesh to minimize the noise.
To adjust the motor to intermediate gear mesh:
1.
Slightly loosen the four socket head cap screws that attach the motor
mount.
15
