7
ENG
2. Fixation the cuff on the wrist
5~10мм
1) Hold the left hand palm up, place the cuff on the wrist so that the housing was on the
side of the palm.
2) Place the cuff on your arm so that its edge is at 5-10 mm from the edge of the palm.
3) Pull the lower part of the cuff, as shown in the picture, fix it so that there is no free space
between the cuff and the wrist . The cuff should fit comfortably.
3. If the cuff can not be worn on the left wrist
If it is not possible to put the cuff on your left wrist , use right wrist for measurement.
NOTE!
• Wear the cuff on naked wrist
• Make sure that the clothes do not come under the cuff
• Do not touch the key O / I, before the cuff is fully fixed at the wrist
IMPORTANT!
• Do not operate the appliance if the cuff is not wearing on the wrist, as this will lead to excessive pumping of the cuff and
may cause its rupture.
