ENG
46
●
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
●
Do not use extension cords. Plug the power cord directly into the electrical outlet.
●
Unplug the power cord from the electrical outlet after using the device. Never leave this product
unattended when plugged in.
●
Unplug the power cord from the electrical outlet before cleaning the device.
●
Completely read all of the instructions included the optional accessories before using them.
●
Not to position the ME EQUIPMENT so that it is dif
fi
cult to operate the disconnection device.
●
The power switch is used to isolate the device from the supply mains.
●
The direction of movement of the actuator of the supply mains switch is comply with IEC 60447.
MAINTENANCE AND STORAGE
●
Keep the device out of the reach of unsupervised infants and children. The device may contain
small parts that can be swallowed.
●
Do not leave the cleaning solution in the nebulizer parts. Rinse the nebulizer parts with clean hot
tap water after disinfecting.
●
Wash the nebulizer parts after each use. Dry the parts immediately after washing.
●
Do not store the air tube with moisture or medication remaining in the air tube. This could result
in infection as a result of bacteria.
●
Store the device and the components in a clean, safe location.
●
Do not carry or leave the nebulizer with medication in the medication tank.
●
Do not place or attempt to dry the device, components or any of the nebulizer parts in a microwave oven.
●
Do not wrap the power cord around the compressor (main unit).
The followings are maintenance and repair which can be taken by operator, or which must be oper-
ated by manufacturer or distributor.
SERVICE AND MAINTEMANCE
RESPONSIBLE
Change the inhalation tube
Operater
Change the applied part
Operater
Change the air
fi
lter
Operater
Clean the surface of the device
Operater
Daily cleaning and disinfecting
Operater
All components which need to be repaired or
changed by seperating the device
Authorized service center of distributor or
manufacturer
WARNING
:
●
Do not modify this equipment without authorizaiton of the manufacturer
●
Do not service or maintenance the device while in use with the patient.
CARE AND DISPOSAL
●
Regularly clean the device and all accessories. It is recommended that all the accessories should
be wiped with a 3% solution of hydrogen peroxide with addition of 0.5% solution of a detergent (for
example, a laundry powder). After that, the nebulizer should be washed by a rich jet of water. The
mouthpieces and nose nozzles may be treated by boiling for 10 minutes or autoclaving at 150°
С
. After
the treatment, wipe dry all parts of the device with a soft cloth.