Step 5
å
1st-Hold your unit level against the wall in its
fi
nal location. Strike a mark through the holes onto the wall.
å
2nd-Place your unit onto the
fl
oor and drill a 5/16" hole on each mark.
å
3rd-While you squeeze the wings together, gently tap four WALL ANCHORS (2) into the holes until they are even with
the surface of the wall.
å
With the help of another person, hold your unit against the wall over the ANCHORS (2).
å
Turn four 2-3/4" PAN HEAD SCREWS (5) through the holes in the BACK(A) and into the WALL ANCHORS (2).
å
NOTE: You will need to turn the 2-3/4" PAN HEAD SCREWS (5) multiple turns to completely tighten and secure your unit
to the wall.
1
st
2
2
nd
Mark and drill a
5/16" hole into
the wall.
Mark and drill a
5/16" hole into
the wall.
2-3/4" PAN HEAD SCREW
(4 used in this step)
5
A
3
rd
Option #2
Steps 4-6
427331
www.litterbox.com/support
Page 8
