Littelfuse Startco AC6000-CART, Manual, Page: 12 / 14

Page 8
AC6000-CART Industrial Shock-Block Cart
Rev. 0-A-010314
3. SB6100 M
OUNTING
An enclosed model of the SB6100 is shown in Fig. 10.
Follow these steps to mount an SB6100 to the
assembled AC6000-CART:

The SB6100 mounting feet align with the inner
holes on the AC6000-MNT cable holder bars.
The outer half of each U-Bolt has previously been
secured in place.

Place a flat washer (O) on the inner half of each
U-bolt (N).

Align and place the SB6100 on the four inner
bolts and secure in place using split lock
washers (P) and hex nuts (R) as shown in Fig. 11.

Tighten all fasteners to a torque of 8.5 N-m
(75 in-lb).
N
O
P
R
NOTE 1
NOTE:
1. ONLY THE AC6000-MNT IS SHOWN FOR CLARITY. THE
AC6000-MNT SHOULD FIRST BE INSTALLED ON THE
AC6000-CART. SEE SECTION 2.4.
FIGURE 11. SB6100 Mounting.