LCD Display
a
b
c
f e
d
g
h
i
l
m
n
o
s
t
j
k
p
q
a
b
c
d
e
Battery Power Level %
Battery Information
indication
Input indication
Output indication
Remaining time
indication
Protection indication
Battery Power Level
Battery lock protection
k
AC Input
Battery high/low
temperature indication
Battery failure/Low
voltage indicate
i
DC Input
j
Solar Input
t
Input power
o
AC Output Icon
q
DC/ Car Outlet Output
p
USB Output Icon
s
Output power
l
Remaining discharge
/ charge time
l
Minutes
l
Hours
f
System failure
indication
m
Overload protection
indication
h
Low temperature
indication
g
Over temperature
indication
n
Over temperature
protection indication
1
.
Long press the main power button to turn on.The main power indicator and the screen lights up, enters the
standby status.
2
.
Click the USB on/off switch to turn on the USB function.
3
.
Plug in the USB devices and start to use.
How to use USB output
1
.
Long press the main power button to turn on.The main power indicator and the screen lights up, enters the
standby state.
2
.
Plug in the DC device.
3
.
Click the DC on/off switch to turn on the DC function.
4
.
After use, click the DC on/off switch to turn off the DC output.
5
.
When not using the product for a long time, please long press the main power switch for 3S to turn off to save power.
How to use DC output
●
Please charge the HS300 before using.
●
Please fully charge the battery before long storage.Please check the HS300 remaining power level
every 3 months and full recharge it again.
●
There have 3 input ports on the Portable Power Station: 1* AC Input Port, 1* solar panel input port
and 1* DC5521 port.
1
.
AC Input
：
AC power supply can be used to charge Portable Power Station with a maximum power of 300W
through the AC charging port.
2
.
Solar charging.
3
.
Car charging.
How to charge
AC
Portable Power Station support Solar Panel charging rated 90W.
You can purchase solar panels and dedicated cable accessories that match the Portable Power Station to achieve
a high-power solar fast charging experience.
CAUTION
：
●
The maximum voltage of solar panels that Portable Power Station can support is 28V,and
the maximum current is 5A.
●
It must be charged by solar panels with a voltage lower than 28V.
●
The input voltage exceeding 28V has the risk of damaging the product.
Solar Panel series/parallel charging
Under the condition that the total power does not exceed 300W, all ac outlets can work togehter at the same time.
1
.
Long press the main power button 3S to turn on. The main power indicator and the screen lights up,
enters the standby state.
2
.
Plug in AC appliances.
3
.
Tap the AC on/off switch to turn on the AC output function. The product starts to supply power to external AC
appliances.
4
.
Long press the AC power on/off switch to turn off the AC output.
5
.
When not using the product for a long time
，
please long press the main power switch for 3S to turn off to
save power.
How to use the AC output function
AC
ON/OFF
POWER
ON/OFF
1
.
Can the product be taken on the plane?
No, because this product is a products with battery, according to international air transportation standards and regulations,
battery capacity products cannot exceed 100Wh.
2
.
The consumers ’power is within the rated output power range of the Portable Power Station but cannot be used?
Because the product has a low power, it needs to be fully recharged and used again.
3
.
Why is there a noise sometimes.
Because this product uses an air-cooled system, the built-in fan can better help the product to dissipate heat, so it is
normal for a slight noise to occur during use.
4
.
How do I store the product when it's not in use?
The portable power station needs to be stored in a dry environment, and the correct storage method can prolong the
service life of the portable power station.
5
.
How do I clean the product if it is dirty?
Please use a dry non-abrasive cloth to wipe. Do not wipe directly with a wet cloth or chemical solvent. If you want to wipe
it more cleanly, we recommend that you use a cotton swab with a small amount of absolute alcohol to wipe. Do not
expose the product to large amounts of water.
FAQs
1
2
CAUTION
：
●
When use the HS300 product, please do not plug the DC input cable into the DC output connector.
Because this may damage the product.
NOTICE
：
●
After the AC outlet function is turned on, the LCD Display AC icon will light up first, and
then there will be a system check time of 8~10 seconds. After checking that the AC power
output function is correct, the AC power output will be performed.
XT60-MC4 Cable
Not included inside
XT60-MC4 Cable
Not included inside