PRECISE
C O L L E C T I O N
CAUTION: For safety and proper operation, read and follow instructions carefully before installation.
INSTRUCTION SHEET
PARTS DESCRIPTION
a
Cover Can
b
Bar Hanger Bracket (2)
c
Bar Hanger Bracket Screws (4)
d
Typical Conduit Knockout
e
Bar Hanger Locking Screw (2)
f
Alternate Mounting Holes
g
Bar Hanger (4)
h
T-Bar Clips (4)
i
Trim Ring Mounting Screw (6)
j
Trim Ring Half (2)
k
Trim Ring Mounting Holes
l
Side Flanges
m
Cup Washer
n
Green Ground Screw
o
T-Bar Clip Screws (4)
IMPORTANT SAFEGUARDS
1.READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
2. Before wiring to power supply, turn off electricity at fuse or
circuit breaker.
3. Disconnect A.C. power before servicing.
4. All servicing should be performed by qualified personnel.
5. Consult your local building code for approved wiring and
installation.
6. Do not use outdoors.
7. Do not mount near gas or electric heater.
8. Fixture must be grounded to avoid potential electric shock.
9. Equipment should be mounted in location and at heights where
it will not readily be subjected to tampering by unauthorized
personnel.
10. The use of accessory equipment not recommended by the
manufacturer may cause an unsafe condition.
11. Do not use this equipment for other than intended use.
SAVE THESE INSTRUCTIONS
FIGURE 1
EMCSA00679 REV B
RECESSED STANDARD ROUGH-IN SECTIONS
SERIES ELA LCRIS
®