SnoWahFlake v2.0
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
8
Footswitches and stargrounding
Tip
Tip
Ring
Ring
Output Jack
Input Jack
Cathode (short leg)
Anode (long leg)
Footswitch
Sleeve
R led
Note that
R led
is a
4k7
resistors. You can change this value depending on the type of LED you use
but 4k7 is safe enough for almost all LEDs @ 9V.
It is now time to place your transistors in the sockets if needed. Connect everything, build it in your
enclosure and enjoy your effect!
The sleeve on the output jack is not connected on purpose. Make sure the output jack is in good
electronic contact with the enclosure else you can try and connect the sleeves of the input and
output together. If you test the unit outside of an enclosure you need to connect the output sleeve
to ground!
