OmniScreamer v1.0
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
9
External Diodes configuration
The wiring for the
SW5
switch is the same as for potentiometers, marking pin 1 with a
rectangle pad
.
There is no wrong way to wire it as long as the middle lugs of the DP3T are connected to one of the
pads like this:
The optional diode switch (
SW5
) enables you to switch between 2 sets of diodes. There are so many
combinations possible and that is why there is a whole page committed to all kinds of combinations.
Feel free to experiment and combine all kinds of diodes.
If you want to use both the onboard as well as the off board diode combinations then make sure you
add SW2 (DIP2) to the PCB so you can switch off the onboard diodes when you wish (like the Tim
™
).
