Carnivale v1.1
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
7
Wiring
C
at
hode
(
shor
t
le
g)
Ano
de
(
long
le
g)
Status
Ring
Sleeve
Tip
Input
Tip
Sleeve
Output
R
led
Note that R led is a 4k7 resistors. You can change these value depending on the type of LED you use
but 4k7 is safe enough for almost all LEDs @+9V.
The sleeve of the output jack is not connected on purpose. It does however require a good contact
between the output jack and enclosure to work. If this is not possible then connect the sleeve of the
output jack to the sleeve of the input jack.
Drill instructions
17,8mm
Volume
Drive/Gain
Tone
17,8mm
17,8mm
Holes for the potentiometers should be 7mm.
