background image

           Page 15

WWW.LITHELI.COM

Item U1GT21112

        

CAUTION

The line cutoff blade on the deflector is
sharp and can cut you.

Do not use your hands to clean the
deflector shield and blade.

Perform only the steps described in these instructions. All further inspection, maintenance, and repair 
work must be performed by an authorized service center or a similarly qualified specialist if you cannot 
solve the problem yourself.

                          Remove Battery Pack and wipe 
external surfaces of the appliance with clean cloth.

                                         inspect the 
general condition of the appliance. Check for:

User-Maintenance and Storage

Procedures not specifically explained in this manual must 
be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK:
Release the Trigger and remove the Battery Pack before performing 
any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM APPLIANCE FAILURE:
Do not use damaged equipment. If abnormal noise or vibration 
occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1 . 

BEFORE EACH USE,

•  loose hardware, 

•  misalignment or binding of moving parts, 

•  cracked or broken parts, 

•  damaged electrical wiring, 

•  any other condition that may 

affect its safe operation.

2. 

AFTER USE,

3.  Li-Ion BATTERY MUST BE RECYCLED OR 

DISPOSED OF PROPERLY. 
Do not short, incinerate or open battery.

4.  Store Battery Pack, Charger, and tool in dry, indoor 

area out of reach of children and away from metal 
objects (i.e., paperclips, coins) to prevent shorting.

5.  All parts are permanently lubricated. 

Do not use additional lubrication.

.  

Troubleshooting

6.  Wipe or scrape clean the cutting head area any 

time there is an accumulation of debris.

7.  Check and tighten all fasteners. If any part is 

damaged or lost, repair or replace it.

8.  Brush debris away from air intake vents and 

exhaust on motor housing to prevent the motor 
from overheating.

Summary of Contents for U1GT21112




















Reviews: