page 8
10. Testing Your Fan.
diagram 1
diagram 2
diagram 3
diagram 4
It is recommended that you test fan before finalizing
installation. Restore power from circuit box and light
switch (if applicable). Test fan speeds with the pull
chain on switch housing. Start at the OFF position (no
blade movement). First pull will set the fan to HI.
Second pull will set the fan to MEDIUM. Third pull will
set the fan to LOW. Fourth pull will re-set the fan to
OFF setting. Test light with pull chain in the middle.
(
diagram 1
) If fan and/or light do (does) not function,
please refer to "Troubleshooting" section to solve any
issues before contacting Customer Service.
Turn fan completely off
before
moving the reverse
switch. Set reverse switch to recirculate air depending
on the season:
- LEFT position in summer (
diagram 2
)
- RIGHT position in winter (
diagram 3
)
A ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting
in winter without feeling a difference in your comfort.
Important
: Reverse switch must be set either
completely to the LEFT
or
completely to the RIGHT
for
fan to function. If the reverse switch is set in the
middle
position (
diagram 4
), fan will not operate.
Raise glass shade in order to guide pull chains
through corresponding holes at the bottom of the
glass shade. Align threaded rod on light kit fitter
with hole in middle of glass shade and push up
gently allowing threaded rod to come through hole.
(Be sure pull chain for fan operation does not rub
against bulb during operation.) Secure glass shade
to light kit fitter with threaded washer.
Note
: Do not overtighten threaded washer as glass
may crack or break.
Align threaded rod with center hole in finial plate,
allowing pull chains to come through
corresponding holes in finial plate, and push up.
Thread center pull chain through hole in finial and
tighten.
Note
:
Do not overtighten finial as glass may crack or
break.
9. Light Kit Assembly. (cont.)
light kit fitter
glass shade
pull chain
pull chain
fan pull chain
light pull chain
finial plate
finial
reverse switch
threaded washer
