Litex Industries WE52BNK5LR Installation Manual Download Page 11

page 10

Troubleshooting.

Problem: 

Fan fails to operate.

Solutions:

1. Check wall switch to fan.
2. Verify that reverse switch is set completely in 
either direction.
3. Check to be sure fan is wired properly.
4. Verify battery was properly installed in remote 
control transmitter.
5. Repeat instructions for remote control 
transmitter, Step 11, page 8, fifth paragraph.

Problem: 

Light kit not lighting.

Solutions:

1. Check wall switch to fan. 
2. Check to be sure wires in canopy are wired 
properly.
3.Verify that molex connections in light kit are 
connected properly.
4. Verify battery was properly installed in remote 
control transmitter.
5. Repeat instructions for remote control 
transmitter, Step 11, page 8, fifth paragraph.

Problem: 

Fan operates but light fails.

Solutions: 

1. Check to be sure wires in canopy are wired 
properly.
2.Verify that molex connections in light kit are 
connected properly.
 

Problem: 

Fan wobbles.

Solutions:

1. Use the balancing kit provided in one of the 
hardware packs. 

If no blade balancing kit is 

provided, please call Customer Support, 
at1-800-527-1292, to request one.

2. Check to be sure set screw(s) on motor housing 
yoke is (are) tightened securely.
3. Check to be sure set screw on hanging ball is 
tightened securely. 

WARNING: 

Failure to disconnect power supply 

prior to troubleshooting any wiring issues may 
result in serious injury.

Warranty.

Parts Replacement.

PWLI1802

For parts and information, please refer to 
"Parts Inventory" on page 2.
Litex Customer Support:

1-800-527-1292

LITEX 30-YEAR LIMITED WARRANTY:
LITEX INDUSTRIES, LTD. warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will replace or 
repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact Litex Customer 
Service at 

1-800-527-1292

 to arrange for return of fan. 

Return fan, shipping prepaid, to Litex Industries, Ltd. We will 
repair or ship you a replacement fan, and we will pay the 
return shipping cost.
5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or 
replace, at no charge to the original purchaser, any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex 
Industries. We will repair or ship purchaser a replacement 
motor and Litex will pay the return shipping cost.
6-YEAR to 30-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will 
repair the fan, at no charge to the original purchaser for 
labor only, if the fan motor fails to operate satisfactorily 
when failure results from normal use. Parts used in the 
repair will be billed to the purchaser at prevailing prices at 
time of repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Litex Industries nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

Summary of Contents for WE52BNK5LR












Reviews: