13
FINAL INSTALLATION
8
Remote Control
Bracket
Wall
8. If you wish to use the remote control bracket from
remote pack (X), install screws from remote pack (X)
through bracket and into the desired installation site.
The remote control transmitter from remote pack (X)
rests inside the bracket.
Bracket
Screws
Install bulbs (H).
CAUTION:
When replacing bulb(s), allow
bulb(s) and glass shade to cool down before
touching.
6
6.
7.
H
7
P
O
I
F
K
H
Q
Place rubber washer (Q) inside glass shade (P)
over center hole. Align hole in center of glass
shade (P) with threaded rod on light kit fitter (F).
Push up gently on glass shade (P) until threaded
rod comes through hole. Secure glass shade (P)
with hex nut (K).
CAUTION:
Do NOT overtighten hex nut (K)
as glass may crack or break.
Then, align hole in center of finial plate (I) with
threaded rod and push up. Secure glass shade
with finial (O).
CAUTION:
Do NOT overtighten finial (O) as
glass may crack or break.
