Installation Instructions
The diagram below shows the typical installation of the VT-8004 and
VR-8004 fiber optic video transmission units. Both should be
connected exactly as shown. There are no adjustments necessary
and each channel is totally independent of every other channel.
Typical Fiber Optic CCTV System
Single Fiber
Optic Cable
Camera
Monitor
VT-8004
Monitor
Monitor
Camera
Camera
VR-8004
8 Cameras
Camera
Monitor
Indicator Indicator
lights
when….
OPTICAL
The transmitter is generating an optical carrier and/or
the receiver is receiving an optical carrier.
READY
The transmitter is modulating the optical carrier and/or
the receiver is receiving the modulated carrier.
VIDEO IN
Video signals are applied to the respective video
channels.
VIDEO OUT
The respective video channels are producing video
signals.
All video input and output signals are connected to the respective
BNC connectors.
The
Power
Terminal Block Connections are:
-
DC return (Common to Housing)
-
+
12VDC input (at 750mA. Maximum)
Note: Be certain to check all connections and voltages before
applying power. Also note that the unit is reverse polarity protected.
