LiteSheet Solutions
Page
3
of
4
Preparation
1.
Turn off power source.
2.
Remove luminaire from packaging.
3.
Remove lens.
4.
Remove knockout from fixture for routing
incoming power.
Installation
1.
Align fixture to surface to be mounted to,
taking care to locate electrical access in
the proper location. Insert incoming
power cables through the knockout hole.
2.
Affix luminaire to surface using code
approved hardware and mounting
techniques.
3.
Carefully remove LED board gear tray,
making sure to not allow the tray to drop
suddenly.
4.
Attach green ground wire to green
ground screw.
