LiteSheet Solutions
Page
3
of
4
CONTENTS OF KIT
•
BCO/BWP or BCOG3/BWPG3 LED Luminaire
TOOLS AND ADDITIONAL PARTS REQUIRED
•
Mounting screws
•
Silicon sealant
•
#2 Philips head screw driver
•
Flat head screw driver
Preparation
1.
Turn off power source.
Installation
1.
Open luminaire by loosening the two screws
located on the side of the housing.
2.
Knock out / drill holes in the rear housing for
mounting fixture to wall and for securement
to junction box (j-box not provided.)
3.
Apply silicon sealant (not provided) to any
unused holes to prevent water entry.
4.
Secure fixture to wall with two or more
screws (not provided).
5.
Secure fixture to junction box with screws
(not provided).
