Pagina 5 di 8
Installations of the accessories
LitesF200
is
delvered
with
a
standard
195x185mm colour frame (standard colour
frame 185x185 can als be used). The LED
source used on LitesF200 allows the use of
colour filters that cannot be used with high
wattage tungstene lamps which would impair
colour filters. Optional and standard 185x185
mm 4-leaf-barndoor can also be installed in the
provided gates. Ensure that accessories when
installed on the LitesF200 are securely fitted in
the gates and that are triggered and secured by
the spring-lock provided. (see figure)
Beam adustment
Lites200F can revolve +-90° upwards and +-
90° donwwards on the axis of the luminaire.
When correct position is set to position, secure it
by tightneing the provided side knob. Beam
adjusment is achieved via rear Helicoidal screw.
Turn clockwise to narrow beam, conversely
beam widens.
Connection to mains
WARNING ! Installation(s) must be accomplished, handled and carried out by qualified personnel only and
must comply with all norms in force in the installation's country
LitesF200 is supplied with a free Blue Neutrik PowerCon plug that must be wired using a 3x1.5mm² lead , additional
specifications include:
Operating Voltage: 300/500V
Test Voltage: 2KV
Operating Temperature: -10°C / +100°C
Connect blue wire to N terminal, brown wire to L terminal and Yellow/Green wire to earth terminal. (see also illustration
fig) Ensure connections to safety circuit breaker at all times. Daisy chain of up to maximum 8 units if connected to
230VAC. Daisy chain of up to maximum 4 units when connected to 110VAC. Maximum daisy chain length: 25m.
WARNING: LitesF200 CANNOT be powered by using an angle phase dimmer pack
Collegamento alla rete elettrica
POWER IN
A
POWER OUT
ZOOM
-
+
A
