LiteOn EVO 8000 Series, User Manual

Page: 159 / 169

156
APPENDIX UL DESCRIPTION
1) “Maximum surrounding air temperature rating of 50ºC for Open Type; 40ºC for UL Type 1”
2) “The drive is suitable for use in a circuit capable of delivering not more than 5,000 rms
symmetrical amperes, 480 Volts Maximum.”
These devices are only intended to be installed with the following branch circuit fuse.
460V Model Input Current (A)
Line Fuse
I (A) Bussmann P/N
0.75kW (1 HP) 4.4 10 FRS-R-10
1.5kW (2 HP) 6.2 15 FRS-R-15
2.2kW (3 HP) 7.2 20 FRS-R-20
3.7kW (5 HP) 11.7 30 FRS-R -30
5.5kW (7.5 HP) 15.6 30 FRS-R -30
7.5kW (10 HP) 23.4 50 FRS-R -50
11kW (15 HP) 31.2 80 FRS-R -80
15kW (20 HP) 40.3 80 FRS-R -80
18.5kW (25 HP) 50.7 90 FRS-R -90
22kW (30 HP) 58.5 125 FRS-R -125
30kW (40 HP) 78 125 FRS-R -125
37kW (50 HP) 85 250 JJS-250
45kW (60 HP) 102 350 JJS-350
55kW (75 HP) 125 400 JJS-400
75kW (100 HP) 150 500 JJS-500
90kW (120 HP) 180 600 JJS-600
110kW (150 HP) 210 700 KTU-700
3) “The drive must be installed in a Pollution 2 environment with clean air according to enclosure
classification. Cooling air must be clean, free from corrosive materials and electrically conductive
dust.”
4) Rubber grommets located on conduit box shall be removed and replaced with conduit hubs in the
end use installation.
5) “Integral solid state short circuit protection does not provide branch circuit protection. Branch
circuit protection must be provided in accordance with the National Electrical Code and any
additional local codes”, or the equivalent.