LITEMAX SSD1505 V2, User Manual

Page: 33 / 35

LITEMAX Electronics Inc. Page 33
OSD Control: Select this option, you will see 4 more options:
Factory_Reset: By pressing this, the screen will be back to the factory
setting on very beginning and lost all the personal settings.
Sharpness: You can make the characters looks sharper.
Exit
Osd_time: You can selection the time of OSD from 2 sec. to 16 sec. Default
is 6 sec.
Osd_HPos: You can move the OSD horizontally over the screen.
Osd_VPos: You can move the OSD Vertically over the screen.
Exit: back to main menu.
BURNIN MODE:
Factory Burn-in mode: While your VGA cable is connected on the monitor, press “Menu” and Left
and Right <” simultaneously, you will see “BURN IN MODE” on the center of the screen for 3 sec.
Then unplug the VGA cable, the screen will show Red, Green, Blue, White, and Black in sequence
automatically.
You can plug in the VGA signal cable, and re-plug the power connector to exit the burn-in mode.
KEY LOCK MODE:
OSD Lock Function: It is possible to lock all the OSD buttons to prevent unauthorized changes to
occur by pressing “Menu” and “right >” buttons simultaneously. You will see the “lock” icon
below on the center of the screen for 3 seconds. If any button is pushed after the lock function is