LITEMAX SLD2415, User Manual, Page: 30 / 37

Page 30
8.7 OSD menu
Here are some instructions for you to use the OSD (On Screen Display). By pressing the “menu”, you
will see the below picture.
Timing shows resolution, H-frequency, and V-frequency of the panel. Version shows the firmware
control version. This 2 information is not changeable by user.
There are 7 sub pages inside the OSD manual, Brightness, Signal select, Sound, Color, Image, Tools,
and Exit.
When you press “menu” button, you enter the “Brightness” sub page. You will see 5 selections:
press ’’menu’’ press ’’menu press ’’menu’’
OSD Brightness:
press ’’right’’ key
press “menu” once, you can go into adjust the brightness. Press “left”
you can dim down the brightness to “0”, while press “right” you can
increase the brightness to “100”.
Ambient light sensor: press this Icon, must to accompany with Litemax
ambient light sensor to auto dimming.(OPTION)
Potentiometer: press this icon, adjust VR function.(OPTION)
Ambient light sensor with OSD offset : press this Icon
Press ’menu’’ once, you can adjust min. luminance to fit your
application (OPTION)
Contrast: Press “menu” and “right” you can adjust the contrast from “0” to
“100” by pressing the “left” and “right”.
Exit: You can exit this sub menu back to normal screen.