Dusk to Dawn High Power
Installation Instructions
LITELUME™ seeks to deliver the most advanced and efficient LED technology. Due to
technology progression, specifications may change. We reserve the right to update product
specifications without notice. Contact LITELUME™ for the most up-to-date data.
www.litelume.com
[email protected]
833.LED.LUME
Page 2/2
Rev Date: 05/3/2019
©Lite Lume Corporation 2018
Arm Mount Instructions
FITTE CLAMP
EXTENSION ARM
HEATSINK
LENS
INCLUDED
FLAT WASHERS
MOUNTING BRACKET
PHOTOCONTROL
PHOTOCONTROL
RECEPTACLE
1. Install wall mounting bracket onto the wall with screws provided.
2. Insert arm into mounting bracket and secure it with carriage screws.
3. Feed supply wires through arm and make wiring connections in the fixture. (White to Neutral lead, Black to Line lead, Yellow
Green to Ground lead)
4. Secure the fixture on the arm with fitter clamp and screws provided.
5. Plug the twisted photocontrol or shorting cap into photocontrol receptacle.
6. Installation is completed
Wiring Diagram
Troubleshooting
1. Check that the line voltage at the fixture is correct. Refer to wiring diagram above.
2. Is the fixture grounded properly?
3. Be sure the photocell, if used, is functioning properly.