POWERING THE AC400 DMX 4X8
The AC400 DMX 4x8 runs off of AC voltage (90VAC to 305VAC; 50/60 Hz).
Additionally, the AC400 DMX 4x8 comes equipped with a 12VDC convenience outlet
for powering ancillary devices, such as a LiteDimmer Wireless TRX unit (sold separately).
HOW TO INSTALL
To install the AC400 DMX 4x8, complete the following:
1) Position the power switch (located above the AC power input) to off.
2) Install the AC input lead into the AC power input.
3) Connect the load to the PL7 DC output connector. Be sure to observe the
power capacity (400W) of the AC400 DMX 4x8.
4) If a DMX connection is desired, provide DMX signal to the DMX input of the
AC400 DMX 4x8.
5) Position the power switch to on.
You are now ready to operate the AC400 DMX 4x8.
When installing the AC400 DMX 4x8, be sure to exploit the various rigging points available,
including slots for zip ties, Velcro® wraps, drywall screws, and ¼-20 screws (SAE), just to
name a few.
