LiteGear LG60009 Installation Manual Download Page 2

Allgemeine Hinweise 

General information

Allgemeine Anweisungen :

Bitte lesen Sie diese Bedienungsanleitung vor der Installation und Inbetriebnahme komplett 
durch und bewahren Sie die Bedienungsanleitung für späteres Nachlesen auf.

Diese Anweisungen sollten zur Unterstützung der Installation des folgenden Produkts ver-
wendet werden: 

LG60009

Sicherheit:

• 

Die Installation dieser Leuchte darf nur von einem Elektriker oder qualifiziertem        

 

Fachpersonal gemäß den geltenden Verdrahtungsvorschriften und den  

 

    

 

geltenden Bauvorschriften durchgeführt werden.

• 

Bitte trennen Sie das Stromnetz vor Installation / Wartung.

•  

 

Stellen Sie sicher, dass die Netzspannung mit dem Geräteaufkleber übereinstimmt.

• 

Überprüfen Sie, ob die Gesamtlast des Stromkreises, auch wenn diese Leuchte 

 

installiert ist, die Nennleistung des Stromkreiskabels, der Sicherung oder des 

 

Leistungsschalters nicht überschreitet.

•  

Ausschließlich vorschriftsmäßige Kabel zur Installation verwenden.

• 

Beachten Sie bei der Auswahl des Installationsorts die IP-Schutzart dieser Leuchte.

•  

Aus Sicherheitsgründen dürfen an dem Gerät keine unbefugten Veränderungen vor 

 

genommen werden.

•  

Gerät nicht mit beschädigtem Netzkabel betreiben. Ist die Zugangsleitung beschädigt,  

 

muss diese durch qualifiziertes Personal ersetzt werden.

• 

Dieses Produkt ist doppelt isoliert

• 

Dieses Produkt ist nicht dimmbar

Safety:

•  

The installation of this luminaire must only be carried out by an electrician or qualified specialist in accordance  

 

with the applicable regulations and applicable building regulations.

• 

Please unplug the mains before installation / maintenance.

•  

Make sure mains voltage matches device label.

•  

Check that the total load of the circuit, even if this lamp is installed, does not exceed the rating of the power cable,  

 

fuse or circuit breaker.

•  

Use only compliant cables for installation.

•  

When selecting the installation location, observe the IP protection (Ingress Protection) of this luminaire.

•  

For safety reasons, no unauthorized modifications may be made to the device.

•  

Do not operate the device with a damaged mains cable. If the access line is damaged, it must be replaced by 

 

qualified personal.

•  

This product is double insulated

•  

This product is not dimmable

Leuchtendaten / Luminaire specifications: 

Nennspannung / Rated voltage: 

 

 

230-240V AC 50/60 Hz 

Lampentyp / Lamp type:       

 

 

16x SMD-LEDs 

Produktgröße / Product Size: 

 

 

310x230x35mm (LxBxH) 

Batterietyp / Battery type:     

 

 

Ni-Cd 3,6V 1500mAh 

Ladezeit / Recharge time:      

 

 

24 Stunden (Erstladung: 36 Stunden) / 

       24 

hours 

(initial 

charge: 

36 

hours)

Notlichtfunktion / Emergency operation time: 

3h

Nennleistung / Rated power:  

 

 

3 Watt

Lumen: 

      140lm 

Erkennungsweite / Viewing distance: 

 

18m

Temperaturbereich / temperature range:   

0°- +45° (Nur für den Innenbereich / Only indoor use)

Summary of Contents for LG60009













Reviews: