LiteGait 300MX, Operators & Service Manual, Page: 25 / 39

25
www.LiteGait.com
1-800-332-9255
Unit Care and Maintenance
Your LiteGait® may differ from the image shown above. Below are images of the LiteGait® harness showing signs of wear that would indicate replacement.
Buckles Assembly
Pull back coverings on end of yoke arms to
expose buckle assembly. Ensure the bolts
securing the buckle assembly are tight and
that the buckle assemblies are firmly
secured to yoke.
Battery
A battery that loses charge quickly or
requires
charging more than the
recommended once per week overnight
should be replaced. Batteries should be
replaced once every 24 to 30 months to
maximize functionality.
Total Locking Casters
Casters should lock in place when the
BRAKE tab is pressed. The caster should not
swivel and the wheel should not rotate.
When unlocked the casters should swivel
and rotate freely.
Handle Bar Knobs
Knobs should screw in and out with ease.
When tightened snug, the handlebars
should be secured into position.
Power System
Test actuator to see if UP and DOWN
Buttons make actuator raise and lower. If
actuator beeps when raising or lowering,
the battery has a low charge. After charging
the battery if it no longer raises or lowers,
the battery may need to be replaced.
Directional Locking Casters
When the STEER tab is pressed, the swivel
of the caster should lock when the caster is
aligned with the leg of the base. The device
should still move forward and backward
with ease.
BiSym Tablet (Optional)
Load Cell instrumented yoke with BiSym
tablet application on Andorid based tablet.
Wear On Buckle Straps
Wear on Covers
Broken Connec tors
Loose Stitching
Fabric Tears
Damaged Buckles