Lite-Puter ECP-T04, User Manual

Page: 73 / 80

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
70
Align with center Align with middle
Top and bottom alignment:
Hold CTRL and select component Cmd1, Cmd2 and Cmd3,then press or
to make those components align with top or bottom.
Align with top Align with bottom
Width and height
Hold CTRL and select component Cmd1, Cmd2 and Cmd3,then press or
to make those components have same width and height.
Notice: If you want to make several components have same width and height, you need
select the width and height of one as the standard. The component which was selected
at the last time is the standard in our software.
For example: in the graphs below, we select Cmd1 as the standard.