background image

Software Installation 

Before Setup... 

   

Verify the IP address setting 

You need to configure your PC’s network settings to obtain an IP address. 
Computer use IP addresses to communicate with each other across a network, 
such as the Internet. 

1.  From the taskbar, click the Start button, select Settings > Control 

Panel. From there, double-click the Network connections icon. 

2.  Right click the Local Area Connection icon Properties; select the 

TCP/IP line for the applicable Ethernet adapter. Then, click the 
Properties button. 

3. Click 

the 

IP Address tab page, select USE the following IP 

address, type 

192.168.1.1

 ~ 

192.168.1.254

 ( but, 

192.168.1.20

 for the device use) in the IP Address field and 

255.255.255.0 in the Subnet Mask field, then click OK button. 

 

Start Setup... 

1.  After getting the correct connection, start the web browser (make 

sure you disable the proxy) and type 

192.168.1.20

 in the Address 

field. Press Enter

 

2.  Enter the factory default 

User name

 and 

Password

    fields:   

User Name: Admin 
Password: 5up 
then click OK button. 

3.  You will enter the Utility homepage. 

 

Summary of Contents for WP310A










Reviews: