background image

 

COPYRIGHT 

 
Copyright by LITE-ON, (LITE-ON Technology Corp.).  No part of this manual may be 
reproduced or transmitted in any form without the expressed, written permission of 
LITE-ON Technology Corp. 
 
 

TRADEMARKS 

 
LITE-ON is a registered trademark of LITE-ON Technology Corp.  Other names, 
trademarks listed here are the property of their respective owners. 
 
 

NOTICE 

 
Although LITE-ON Technology has attempted to ensure the accuracy of the content of 
this manual, it is possible that this document may contain technical inaccuracies, 
typographical, or other errors.  LITE-ON Technology assumes no liability for any error in 
this publication, and for damages, whether direct, indirect, incidental, consequential, or 
otherwise, that may result from such error, including, but not limited to loss of data or 
profits. 
 
LITE-ON Technology provides this publication “as is” without warranty of any kind, 
either express or implied, including, but not limited to implied warranties of 
merchantability or fitness for a particular purpose. 
 
The published information in the manual is subject to change without notice.  LITE-ON 
Technology reserves the right to make changes in the product design, layout, and driver 
revisions without notification to its users. 

 

 
 
 
 

Summary of Contents for Scenic Edition X101

















Reviews: