NA380 Motherboard
34
Power Management Setup Option
This option lets you control system power management. The system has
various power-saving modes including powering down the hard disk, turning
off the video, suspending to RAM, and software power down that allows the
system to be automatically resumed by certain events.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the system is in-
active for a time, the timeouts begin counting. If the inactivity continues so
that the timeout period elapses, the system enters a power-saving mode. If
any item in the list of Reload Global Timer Events is Enabled, then any ac-
tivity on that item will reset the timeout counters to zero.
Wake Up Calls
If the system is suspended, or has been powered down by software, it can
be resumed by a wake up call that is generated by incoming traffic to a mo-
dem, a LAN card, a PCI card, or a fixed alarm on the system realtime clock,
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Power Management Setup
Item Help
ACPI function
[Enabled]
ACPI Suspend Type
[S1(POS)]
Video Off Option
[Suspend --> Off]
Video Off Method
[DPMS Supported]
MODEM Use IRQ
[Auto]
Hot Key Function as
[Power Off]
Hot Key Power On Function
[Disabled]
USB S3 WakeUp Function
[Disabled]
HDD Off After
[Disable]
Power Button Override
[Instant-Off]
Power State Resume Control
[Always Off]
PM Wake Up Events
[Press Enter]
Menu Level
↑↑↓↓→
→←
←
:Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
