Lister Petter T Series, Operator'S Handbook Manual

Page: 14 / 81

13
T series enGines operaTors' handbook
• Ensure that the engine is free to
turn without obstruction.
• Check that the lubricating oil level
is correct. The oil sump must be filled
to the ‘full’ mark on the dipstick; do not
overfill.
• Check that the fuel supply is
adequate and the system is primed.
• Ensure that the battery is connected,
fully charged and serviceable.
• Where possible, disengage the
driven equipment while starting.
1.11 liFTinG preCauTions
A lifting eye is fitted to the top of your
T Series engine. The following points
must be considered before attempting
to lift the engine.
• Ensure any lifting equipment to be
used has the correct capacity to lift the
engine.
• Ensure that the lifting equipment
is designed to give a vertical lift from
directly above the engine lifting eye.
• Check that the engine lifting eye is
not damaged and that it is secure.
• The engine lifting eye is suitable
for lifting the engine and accessory
assemblies originally fitted by Lister
Petter.
WarninG
engine lifting eyes must not be used
to lift the complete plant.
WarninG
do noT WorK Under Any PlAnT
ThAT IS only held by oVerheAd
lIFTIng eqUIPMenT.
1.12 preCauTions beFore
mainTenanCe
• Understand the service procedures
before commencing any work.
• Ensure all starting devices are
removed or isolated before beginning
any work on engine or plant.
• Ensure the work area is clean,
dry, well ventilated and has adequate
lighting.
• Ensure that all personnel using
equipment or processes in connection
with the maintenance of plant and
mach inery have received adequate
and suitable training.