Listen LR-600, User Manual

Page: 11 / 32

Setup & Pr
ogramming
9
LR-600 Setup and Programming
Channel Selection
Using the channel select buttons (UP and DOWN buttons on the rear panel) or the SEEK button,
select the desired receive channel. For more information, see Channel Selection on page 19.
Locking Channel Selection
If you don’t want the user to have the ability to change the channel, it is highly recommended that
you lock the channel select function. This is accomplished as follows:
· Press and hold the SEEK button for 5 seconds.
· The padlock icon will appear in the display.
· To unlock the channel selection function, press and hold the SEEK button until the
padlock icon goes out.
Locking Both Volume and Channel Selection
Once the channel and desired volume have been set, you can lock both functions as follows:
· Press the SEEK button and then the UP button on the rear panel.
· The PADLOCK icon will flash.
· To unlock both the volume and the channel selection function press the SEEK button and then
the DOWN button on the rear panel.
Setting the SQ
Use Channel UP / DOWN or Seek to
select a receive channel.
A padlock in the display means the channel
is locked and a new channel cannot be
selected. If the padlock icon is flashing, both
the channel and volume settings are locked
(see below).
Press Seek, and then the Channel UP button to lock volume and channel.
Press Seek, then DOWN to unlock.