PERSONAL LISTENING
MANUAL
PAGE 9
PL-DAP-2310
Wireless Access Point that connects to the server and provides the Wi-Fi broadcast of the multiple
audio channels received on audio streaming enabled wireless devices like the iPhone, iPad, Andorid
on other Wi-Fi enabled devices.
PL-POEA
The power over Ethernet adaptor is provided to
allow the installation of the wireless access point in
a remote location from the server.
1. Data In connection
2. Data & Power Out connection
Note: PoE adaptor can be used in place of the
power supply provided with the Wireless Access
Point. This allows for a simpler installation of the
Wireless Access Point by powering the Access
Point via the connected Ethernet cable.
1. LAN PoE port – connection port for the PLS Server (via the PL_POEA if you are using PoE)
2. Reset – Do not reset the Access Point unless instructed to do so be Listen Tech Support
3. Power – DC Power connector
Note: Access Point IP address is set to 172.27.80.50, the subnet mask is 255.255.240.0, and the SSID has
been set to “Personal Listening” to enable the access point to communicate directly with the server.
1
2
3
1
2
