background image

18

Information

Warranty & Contacting Listen

Warranty

Listen Technologies Corporation (Listen) warrants its transmitters and receivers (LT-82, LT-700, LT-800, LR-100, LR-42,

LR-44, LR-300, LR-400, LR-500, LR-600) to be free from defects in workmanship and material under normal use and 

conditions for the useful lifetime of the product from date of purchase.

 

Listen warrants its Stationary IR Radiators (LA-140) to be free from defects in workmanship and material under normal 

use and conditions for three years from the date of purchase.

Listen warrants its Noise Canceling Microphone (LA-270) to be free from defects in workmanship and material under 

normal use and conditions for one year from date of purchase.

Listen warrants its Charging/Carrying Cases (LA-306, LA-311, LA-313, LA-317, LA-318, LA-319, LA-320, LA-321, LA-322, 

LA-323, LA-324, LA-325) to be free from defects in workmanship and material under normal use and conditions for 

one year from date of purchase.

All other products and accessories are warranted for 90 days from date of purchase. 

This warranty is only available to the original end purchaser of the product and cannot be transferred. Warranty is 

only valid if warranty card has been returned within 90 days of purchase. This warranty is void if damage occurred 

because of misuse or if the product has been repaired or modifi ed by anyone other than a factory authorized 

service technician. Warranty does not cover normal wear and tear on the product or any other physical damage 

unless the damage was the result of a manufacturing defect. Listen is not liable for consequential damages due to 

any failure of equipment to perform as intended. Listen shall bear no responsibility or obligation with respect to the 

manner of use of any equipment sold by it. Listen specifi cally disclaims and negates any warranty of merchantability 

or fi tness of use of such equipment including, without limitation, any warranty that the use of such equipment for any 

purpose will comply with applicable laws and regulations. The terms of the warranty are governed by the laws of the 

state of Utah. 

In the fi rst ninety days after purchase, any defective product will be replaced with a new unit. After 90 days, Listen 

will, at its own discretion either repair or replace transmitters and receivers with a new unit or a unit of similar type 

and condition. Product that is not covered under warranty shall be repaired or replaced with a unit of similar type 

and condition based on a fl at fee. Contact Listen for details.

This limited warranty, prices and the specifi cations of products are subject to change without notice.

Contacting Listen

If technical service is needed, please contact Listen. Pre-authorization is required before returning Listen products. 

If products were damaged in shipment, please contact the carrier, then contact Listen for replacement or repair 

requirements payable by the carrier.

Listen’s corporate headquarters are located in Bluffdale, Utah U.S.A. and are open Monday through Friday, 8am to 

5pm Mountain Time.

14912 Heritagecrest Way

Bluffdale, Utah 84065-4818

+1.801.233.8992

+1.800.330.0891 North America

+1.801.233.8995 fax

[email protected]

www.listentech.com

Listen Technologies GmbH

Jasminstr.16, 90522 Oberasbach, Germany

+49 911 955 159 0

 Europe

+49 911 955 159 40 

Fax

[email protected]

www.listentech.de

Summary of Contents for LA-122

























Reviews: