Safety
2.6. Maintenance, Service and Troubleshooting
Have special work performed only by technicians authorized for it.
Perform adjustment, maintenance and service work according to
instructions in the operating manual. Keep the specified intervals for
service work.
Inform operating personnel before beginning special and maintenance
work. Name a surveillance person.
If the machine is completely shut off during service and repair work,
secure the machine against accidental start.
When the machine is being cleaned of material residues, always
disconnect the machine and the extraction system from the mains supply.
Before cleaning the machine with cleaning agents, close all openings with
suitable materials in which no water or cleaning agent can penetrate, for
safety or functional reasons. Electric motors and switches are especially
at risk.
Do not perform any cleaning with high pressure cleaners.
Openings which were sealed before cleaning must be completely opened
after cleaning.
Always tighten loosened screw connections with the specified tightening
torques during maintenance and service work.
If safety equipment is dismantled during changeover, maintenance,
service and repair, remount and check the safety equipment immediately
after the work is completed.
Dispose of operating and auxiliary materials and replacement parts in a
safe and environmentally sound manner.
10
Deslagging machine SBM-M 1000/1500 D2
