Lissmac CDM 25 W, Operating Manual, Page: 13 / 30

13/30
2.3. Technical data
CDM 25 W CDM 33 W
230 V 110V 230 V 110V
Rated power: 2500 W 3300 W
Output power: 1800 W 2550 W
Current consumption 12 A 24A 16 A 24A
Kind of current Single phase Single phase
System of protection (Insulation) Class 2 Class 2
Spindle speed without load
Gear I 510 1/min 310 1/min 350 1/min
Gear II 1000 1/min 670 1/min 690 1/min
Gear III 1420 1/min 1000 1/min 1050 1/min
Spindle speed with load
Gear I 360 1/min 220 1/min 150 1/min
Gear II 680 1/min 420 1/min 295 1/min
Gear III 1050 1/min 650 1/min 450 1/min
Height 194 mm 194 mm
Width 181 mm 181 mm
Length 541 mm 541 mm
Net weight 12,7 kg 13.3 kg 13,3 kg 15.3 kg
Technical data written here may change without notice.
2.4. Noise level
The measurements were carried out in corresponding to the norms EN ISO 3744, EN ISO 11201 and
EN 12418. Therefore, a standard core drill was used.
No load recorded loudness. Highest recorded loudness.
CDM 25 W/WP 95 dB 115 dB
CDM 33 W/WP 95 dB 118 dB