DIREZIONE
Via Veneto, 8
– I-24041 Brembate (BG)
Tel. +39 035 4826195
– Fax +39 035 2283818
www.liski.it
3
4)
INSTALLATION
To put the poles into the snow, ice or ground, LISKI suggest to use a Ø 32 or 35 mm drill bit,
depending on the snow conditions.
Assemble the protection system putting the net into the 2 pole hooks; the hooks should be all at the
same height (1 at top, 1 at low of the pole), the lower hook should be forward down, the other one
forward up.
The groups of net, all of the same kind, should be attached and the “uphill” group should surmount
the “downhill” group, to avoid that the fallen skier can impact and pass through the only opening of
the net, at the joint by two net groups; do not align joints of net sections in the same direction of
impact of the skier.
The number of rows that must be placed depending by situation and by danger level, LISKI BC-130
NET can be placed in 1,2,3 or more rows; install the second row of net parallel to the first net, the
distance between the two nets should be as described in the set-up model.
EXAMPLE OF “LISKI” BC-130 NET PROTECTION SYSTEM
SET-UP MODEL
IMPACT DIRECTION
The “Uphill” group (red) should surmount at the “Downhill” one
(blue) to avoid that the fallen skier can impact and pass through
the only opening of the net, at the joint by two net groups.
