Remove Device
For the Android mobile phone, the device can be disconnected from your mobile phone by simply
clicking on Remove device.
For Apple mobile phone after binding removal, you need to click on the symbol on the right in Set-
ting- Bluetooth, and choose to ignore the device. As shown below:
Frequently Asked Questions (FAQs)
l. Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes
out?
l> Lock background APP. When the Da Fit process is cleared, the smart bracelet will be discon-
nected from the mobile phone.
2 > Set APP self-startup
3 > Unrestricted background operation. The Android mobile phone installed with APP intelligently
restricts the background operation by default, and App should be set manually without
any restriction.
2. Why cannot the smart bracelet receive message push?
l> Please confirm that you have turned on the switch for message push at the mobile phone client.
2 > Please confirm that messages can be displayed normally in the mobile phone notification bar.
The message push on the smart bracelet is completed by reading the message from the mobile
phone notification bar. The smart bracelet will not receive the message push if there is no messa
-
ge in the mobile phone notification bar. (You need to find notification settings in the mobile phone
settings, and turn on the notification switch of WeChat, QQ, call, SMS and mobile phone client).
3 >Turn on the mobile phone --- Settings. Enter
“Notification use right” on the top search box, re-open Da Fit.
3. Why can’t take a hot bath with the smart órace let?
Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is in
the gas phase with small molecular radius and can easily infiltrate into the smart bracelet from the
shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets
which will easily cause the short circuit inside the smart bracelet.
