background image

 

 

Version

 

01.2017 

 

OPERATION AND INSTALLATION MANUAL 

INTRODUCTION 

 

Dear customer, 

We desire to thank you for the trust placed in 

LISEO

 products. 

Throughout the years, you will appreciate the quality of our product, result of our interest in offering to you the best 
technology, ease of use and, above all, safety. 

For obtaining an optimal performance, we recommend you to read carefully this manual before the first firing. 
 
 

MANUAL PRESERVATION 

Ensure that this manual is always with the appliance even in the event of a change of owner, user or moved to 
another location. 
You can request another copy to the technical service in the area. 
 
 

WARNING AND WARRANTY 

CONDITIONS 

 

The installation must be performed by authorized personnel. Request to your installer a declaration of 
conformity of the installation, in which he will assume full responsibility for the final installation and therefore 
the proper functioning of the installed product.  

Pay special attention to the laws and regulations in the area of the device installation.   

LISEO doesn't take any responsibility

 in the event of failure to comply with these precautions. 

To ensure its proper operation, the stove components can only be replaced by original spare parts and repaired by an 
authorized Assistance Technical Center. 

These devices 

are not

 intended for use by persons with reduced physical, sensory or mental limited or without 

experience or knowledge. Children should be supervised at all times to ensure that they do not play with the 
equipment or come into contact with hot work surfaces. 

After a long period of inactivity, before turning the appliance, check that there are no obstructions. 
In this case, contact the Assistance Service Center. 

In case of fire in the flue pipe, keep closed the door and the input of combustion air of the fireplace. Request the 
intervention of the competent authorities. 
 

 

EXCLUSIONS 

 

Excluded from the warranty all parts that may be defective due to negligence or careless use, incorrect 
maintenance or installation not compliant with that specified by LISEO

They are not part of the guarantee those parts subject to normal wear such 

as joints, glass and any all parts that 

can be removed from the fire box

Replaced parts will be warranted for the remaining warranty period, with effect from the date of appliance purchase. 

The glass are guaranteed until the moment when the authorized installer confirms its integrity and completes 
commissioning. 

 

 

 

 

Summary of Contents for BLACK L71













Reviews: